Synthesis and characterization of water-soluble C₆₀–peptide conjugates

• Yue Ma,
• Lorenzo Persi and
• Yoko Yamakoshi

Beilstein J. Org. Chem. 2024, 20, 777–786, doi:10.3762/bjoc.20.71

• -soluble C60 and C70 derivatives by covalently attaching biocompatible water-soluble polymers, such as polyethylene glycol (PEG) [37][38] and PVP [39]. Although these C60– and C70–polymer conjugates revealed high water-solubility, it was found that they, especially the PEG conjugates, formed micelle-like

Green and sustainable approaches for the Friedel–Crafts reaction between aldehydes and indoles

• Periklis X. Kolagkis,
• Eirini M. Galathri and
• Christoforos G. Kokotos

Beilstein J. Org. Chem. 2024, 20, 379–426, doi:10.3762/bjoc.20.36

Clauson–Kaas pyrrole synthesis using diverse catalysts: a transition from conventional to greener approach

• Dileep Kumar Singh and
• Rajesh Kumar

Beilstein J. Org. Chem. 2023, 19, 928–955, doi:10.3762/bjoc.19.71

• synthesis of N-substituted pyrroles 29 in the yields of 85–97% using squaric acid as catalyst. In this reaction, various amines 28 and 2,5-DMTHF (2) were reacted in greener solvents like water, deep eutectic solvent (DEC) and polyethylene glycol (PEG) under thermal or ultrasonic irradiation (Scheme 13a

Combretastatins D series and analogues: from isolation, synthetic challenges and biological activities

• Jorge de Lima Neto and
• Paulo Henrique Menezes

Beilstein J. Org. Chem. 2023, 19, 399–427, doi:10.3762/bjoc.19.31

• . Subsequent one-step reaction using sodium borohydride and polyethylene glycol gave directly alcohol 124, which was subjected to the Mitsunobu reaction with the carboxylic acid 112. The obtained ester 125 was then used in an intramolecular Ullmann reaction to yield the benzylated combretastatin D-4, 109 in

Discrimination of β-cyclodextrin/hazelnut (Corylus avellana L.) oil/flavonoid glycoside and flavonolignan ternary complexes by Fourier-transform infrared spectroscopy coupled with principal component analysis

• Nicoleta G. Hădărugă,
• Gabriela Popescu,
• Dina Gligor (Pane),
• Cristina L. Mitroi,
• Sorin M. Stanciu and
• Daniel Ioan Hădărugă

Beilstein J. Org. Chem. 2023, 19, 380–398, doi:10.3762/bjoc.19.30

• -based ternary complexes, but they do not deal with triglyceride-based vegetable oils or with flavonoid glycosides/flavonolignans. Most of these studies are related to controlled release of various drugs from the CD complexes such as diosmin and polyethylene glycol, haloperidol and lactic acid

Automated grindstone chemistry: a simple and facile way for PEG-assisted stoichiometry-controlled halogenation of phenols and anilines using N-halosuccinimides

• Dharmendra Das,
• Akhil A. Bhosle,
• Amrita Chatterjee and
• Mainak Banerjee

Beilstein J. Org. Chem. 2022, 18, 999–1008, doi:10.3762/bjoc.18.100

• relatively inferior results than EtOH (Table 1, entry 3). The use of ethylene glycol and glycerol as the grinding matrix showed improved yields with the monobromo product 2a formed in 81% and 85% yield, respectively within 10 min (Table 1, entries 4 and 5). Next, liquid polyethylene glycol, PEG-400 was

Synthesis of 3,4,5-trisubstituted isoxazoles in water via a [3 + 2]-cycloaddition of nitrile oxides and 1,3-diketones, β-ketoesters, or β-ketoamides

• Md Imran Hossain,
• Md Imdadul H. Khan,
• Seong Jong Kim and
• Hoang V. Le

Beilstein J. Org. Chem. 2022, 18, 446–458, doi:10.3762/bjoc.18.47

• , Saugus, MA, USA). The DART ion source was operated with helium gas (approximately 4.0 L/min flow rate), the gas heater (350 °C), and the source grid (350 V). The data acquisition range was from m/z 50 to 1000. Polyethylene glycol (PEG 600) was used for the exact mass calibration. General synthetic

Recent developments and trends in the iron- and cobalt-catalyzed Sonogashira reactions

• Surendran Amrutha,
• Sankaran Radhika and
• Gopinathan Anilkumar

Beilstein J. Org. Chem. 2022, 18, 262–285, doi:10.3762/bjoc.18.31

• compatible with the catalyst and afforded the products with high yield. The efficiency of the catalyst in water was found to be increased by introducing polyethylene glycol (PEG) chains. From the mechanistic explanation, the reaction proceeds via an oxidative addition and reductive elimination route. Fe3O4

• @PEG/Cu-Co catalyst transfers an electron from Co(III) to Cu(I). As the next step, a π complex B is formed between the metal center and the acetylene groups. A copper acetylide intermediate C is formed from complex B. The hydrophilicity of the catalyst could be increased by the use of polyethylene

• glycol groups. In addition, the aryl halide oxidatively adds to copper changing its oxidation state to +3. Finally, the desired product is formed by reductive elimination and the catalyst returns to the cycle (Scheme 33). The designed catalyst was characterized by different techniques which showed

1,2-Naphthoquinone-4-sulfonic acid salts in organic synthesis

• Ruan Carlos B. Ribeiro,
• Patricia G. Ferreira,
• Amanda de A. Borges,
• Luana da S. M. Forezi,
• Fernando de Carvalho da Silva and
• Vitor F. Ferreira

Beilstein J. Org. Chem. 2022, 18, 53–69, doi:10.3762/bjoc.18.5

• °C, and method B was carried out with t-BuOK in polyethylene glycol (PEG300) at room temperature. In both methods, the reaction conditions were mild and produced the product in moderate to good yields. The same group investigated this reaction with substituted acetonitriles to obtain 2

Stepwise PEG synthesis featuring deprotection and coupling in one pot

• Logan Mikesell,
• Dhananjani N. A. M. Eriyagama,
• Yipeng Yin,
• Bao-Yuan Lu and
• Shiyue Fang

Beilstein J. Org. Chem. 2021, 17, 2976–2982, doi:10.3762/bjoc.17.207

• method is expected to significantly lower PEG synthesis cost. Keywords: base-labile; monodisperse; PEG; polyethylene glycol; protecting group; Introduction Polyethylene glycols and derivatives (PEGs) have found wide applications in many areas [1][2][3][4][5][6]. For some applications, polydisperse PEGs

Post-functionalization of drug-loaded nanoparticles prepared by polymerization-induced self-assembly (PISA) with mitochondria targeting ligands

• Janina-Miriam Noy,
• Fan Chen and
• Martina Stenzel

Beilstein J. Org. Chem. 2021, 17, 2302–2314, doi:10.3762/bjoc.17.148

• efficiency on a protein covered nanoparticle was significantly reduced compared to a non-protein bounded nanoparticle. Stealth like nanoparticle surfaces, such as surfaces covered with polyethylene glycol or phosphorylcholine, are therefore attractive for biological applications, as they have the ability to

Enhanced target cell specificity and uptake of lipid nanoparticles using RNA aptamers and peptides

• Roslyn M. Ray,
• Anders Højgaard Hansen,
• Maria Taskova,
• Bernhard Jandl,
• Jonas Hansen,
• Citra Soemardy,
• Kevin V. Morris and
• Kira Astakhova

Beilstein J. Org. Chem. 2021, 17, 891–907, doi:10.3762/bjoc.17.75

• -3-phosphoethanolamine-N-[amino(polyethylene glycol)-2000] and observed that their LNP–DNA aptamer was able to deliver target siRNA into osteoblasts via macropinocytosis, increasing bone formation in vitro and in rodents [47]. In 2017, Kim et al. used a postinsertion method to incorporate an aptamer

Valorisation of plastic waste via metal-catalysed depolymerisation

• Francesca Liguori,
• Carmen Moreno-Marrodán and
• Pierluigi Barbaro

Beilstein J. Org. Chem. 2021, 17, 589–621, doi:10.3762/bjoc.17.53

Synthesis and physicochemical evaluation of fluorinated lipopeptide precursors of ligands for microbubble targeting

• Masayori Hagimori,
• Estefanía E. Mendoza-Ortega and
• Marie Pierre Krafft

Beilstein J. Org. Chem. 2021, 17, 511–518, doi:10.3762/bjoc.17.45

• -Dipalmitoylphosphatidylcholine (DPPC, >99%) and 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000] (DPPE-PEG2000, >99%) were purchased from Avanti Polar Lipids (Alabaster, AL, USA) and used without further purification. Perfluorohexane came from Fluorochem (>98%). A HEPES (N-2-(hydroxyethyl

A systematic review on silica-, carbon-, and magnetic materials-supported copper species as efficient heterogeneous nanocatalysts in “click” reactions

• Pezhman Shiri and
• Jasem Aboonajmi

Beilstein J. Org. Chem. 2020, 16, 551–586, doi:10.3762/bjoc.16.52

• multitriazole products in polyethylene glycol as a green solvent at room temperature (Scheme 10). The authors proposed that sodium ʟ-ascorbate acted as a reducing agent in the reduction of Cu(II) to Cu(I). Aromatic/aliphatic terminal acetylenes and benzyl bromides bearing electron-rich and electron-deficient

An overview of the cycloaddition chemistry of fulvenes and emerging applications

• Ellen Swan,
• Kirsten Platts and
• Anton Blencowe

Beilstein J. Org. Chem. 2019, 15, 2113–2132, doi:10.3762/bjoc.15.209

• reported by Boul et al. Reactions occur between a pentafulvene and dicyanoethylenecarboxylate or tricyanoethylenecarboxylate [189]. Polymerisation and dynamer formation via Diels–Alder cycloaddition between fulvene groups in polyethylene glycol bis(fulvene) and bis(tricyanoethylenecarboxylate) derivatives

Aqueous olefin metathesis: recent developments and applications

• Valerio Sabatino and
• Thomas R. Ward

Beilstein J. Org. Chem. 2019, 15, 445–468, doi:10.3762/bjoc.15.39

• analogues (Scheme 8). However, catalysts 1 and 2 are unstable in water and their use is limited to ROMP. Polyethylene glycol (PEG)-tagged catalysts (10 and 11, Figure 1c) showed significantly improved RCM activities in water, but they tend to form aggregates in water due to their high molecular weight (ca

Olefin metathesis catalysts embedded in β-barrel proteins: creating artificial metalloproteins for olefin metathesis

• Daniel F. Sauer,
• Johannes Schiffels,
• Takashi Hayashi,
• Ulrich Schwaneberg and
• Jun Okuda

Beilstein J. Org. Chem. 2018, 14, 2861–2871, doi:10.3762/bjoc.14.265

• catalyst and carbohydrate or small polyethylene glycol (PEG) groups were attached [11]. As another strategy to modify a protein surface with olefin metathesis, Isarov and Pokorski introduced a Grubbs 3rd generation catalyst on the surface of lysozyme and performed ring-opening metathesis polymerization

The design and synthesis of an antibacterial phenothiazine–siderophore conjugate

• Abed Tarapdar,
• James K. S. Norris,
• Oliver Sampson,
• Galina Mukamolova and
• James T. Hodgkinson

Beilstein J. Org. Chem. 2018, 14, 2646–2650, doi:10.3762/bjoc.14.242

• -cleavable linker. A polyethylene glycol (PEG) linker was selected as PEG linkers demonstrate enhanced water solubility in comparison to alkyl chain linkers. We then had to make a decision on the position of attachment for the PEG linker to compound 1. For siderophore conjugates, it is crucial that the

An alternative to hydrogenation processes. Electrocatalytic hydrogenation of benzophenone

• Cristina Mozo Mulero,
• Alfonso Sáez,
• Jesús Iniesta and
• Vicente Montiel

Beilstein J. Org. Chem. 2018, 14, 537–546, doi:10.3762/bjoc.14.40

• using NaBH4 as reducing agent in a water-in-oil (w/o) microemulsion in the presence of polyethylene glycol hexadecyl ether, Brij@30 as capping agent and n-heptane as organic solvent (water/Brij@30/n-heptane). After precipitation and copiously washing with acetone and water, Pd nanoparticles were

Preparation of trinucleotide phosphoramidites as synthons for the synthesis of gene libraries

• Ruth Suchsland,
• Bettina Appel and
• Sabine Müller

Beilstein J. Org. Chem. 2018, 14, 397–406, doi:10.3762/bjoc.14.28

• of the desired products [34][39]. 4. Preparation of trinucleotides on soluble supports Another strategy of combining the advantages of solution chemistry and solid-phase methods is the assembly of oligonucleotides on soluble supports. Among the supports used for this purpose, polyethylene glycol (PEG

Aminosugar-based immunomodulator lipid A: synthetic approaches

• Alla Zamyatina

Beilstein J. Org. Chem. 2018, 14, 25–53, doi:10.3762/bjoc.14.3

• compounds using labeling reagents having a hydrazide group. A hydrophilic fluorescence group Alexa Fluor 568 and polyethylene glycol-linked biotin were introduced using hydrazone formation reaction between the aldehyde group of the glutaryl-Glc linker and the hydrazide group of the labeling reagent. In

Recent applications of click chemistry for the functionalization of gold nanoparticles and their conversion to glyco-gold nanoparticles

• Vivek Poonthiyil,
• Thisbe K. Lindhorst,
• Vladimir B. Golovko and
• Antony J. Fairbanks

Beilstein J. Org. Chem. 2018, 14, 11–24, doi:10.3762/bjoc.14.2

• substitution by reaction with NaN3 then resulted in AuNPs with mixed monolayers containing 52% N3- and 44% CH3-terminated alkanethiol ligands. A series of alkynes were synthesised, including derivatives of nitrobenzene (1), ferrocene (2), anthracene (3), pyrene (4), aniline (5), and polyethylene glycol (6) all

Molecular recognition of N-acetyltryptophan enantiomers by β-cyclodextrin

• Spyros D. Chatziefthimiou,
• Mario Inclán,
• Petros Giastas,
• Athanasios Papakyriakou,
• Konstantina Yannakopoulou and
• Irene M. Mavridis

Beilstein J. Org. Chem. 2017, 13, 1572–1582, doi:10.3762/bjoc.13.157

• )salicylaldimine complex in ethanol, novel association of β-CD monomers in structures of β-CD complexes, e.g., with 4-pyridinealdazine [30], polyethylene glycol [38] or adamantane [39]. Conclusion This work has been focused on the ability of β-CD to discriminate between the enantiomers of N-acetyltryptophan. NMR

Synthesis of oligonucleotides on a soluble support

• Harri Lönnberg

Beilstein J. Org. Chem. 2017, 13, 1368–1387, doi:10.3762/bjoc.13.134

• by Bonora et al. [37] on polyethylene glycol (PEG 5000) monomethyl ester. The overall strategy was rather similar to that of the solid-supported chemistry (Scheme 2). Accordingly, the 3´-terminal nucleoside, 5´-O-DMTr-N6-Bz-dA, was attached to the support via a 3´-succinyl linker, the 5´-O-DMTr group